Toro GT series Service Manual page 202

9. Install a hairpin cotter securing the bypass lever and
spring to the bypass bracket on the transmission
(Fig. 693).
Fig 693
10. Position the ground wire to the transmission bracket
and install a screw to secure it (Fig. 694).
Fig 694
GT Series Tractors Service Manual
HYDROSTATIC DRIVE SYSTEM
11. Position the actuator bracket with the spring switch
PICT-7556
12. Plug the harness wire into the actuator bracket
PICT-7544
to the slot in the transmission (Fig. 695).
Fig 695
spring switch (Fig. 696).
Fig 696
PICT-7574
6
PICT-7534
6-15