GEAR DRIVE SYSTEM
10. Loosen the 8 bolts securing the rear wheels to the
wheel hub assemblies (4 on the left and 4 on the
right) (Fig. 467).
5
11. Raise and support the rear of the machine.
12. Remove the 8 lug nuts and remove the 2 wheel
assemblies from the wheel hubs (Fig. 468).
5-12
Fig 467
PICT-7502a
Fig 468
PICT-7503a
13. Raise the machine.
14. Remove the 4 bolts securing the variable speed
pulley assembly to the transmission (Fig. 469).
Fig 469
15. Tilt the variable speed pulley forward and remove
the belt from it (Fig. 470).
Fig 470
GT Series Tractors Service Manual
PICT-8525
PICT-7642