Toro GT series Service Manual page 204

17. Insert the trunnion on the front end of the speed
control rod into the speed control linkage (Fig. 701).
Fig 701
18. Install a hairpin cotter securing the front end of the
speed control rod to the speed control linkage (Fig.
702).
Fig 702
GT Series Tractors Service Manual
HYDROSTATIC DRIVE SYSTEM
19. Position the rear end of the brake control rod
PICT-7523
PICT-7522
through the hole in the frame and up to the trans-
mission (Fig. 703).
Fig 703
rod (Fig. 704).
Fig 704
PICT-7521
6
PICT-7518
6-17