GEAR DRIVE SYSTEM
3. Route the belt up toward the top of the transmission
(Fig. 452).
4. Route the belt so that it is positioned around the shift
5
rod (Fig. 453).
5-8
Fig 452
PICT-7648
Fig 453
PICT-7644
5. Tilt the variable speed pulley forward and route the
belt around it into the lower pulley groove (Fig. 454).
Fig 454
6. Install 4 bolts securing the variable speed pulley
assembly to the transmission (Fig. 455).
Fig 455
GT Series Tractors Service Manual
PICT-7642
PICT-7640a