Toro GT series Service Manual page 254

5. Repeat steps 2 – 4 to install the height adjuster onto
the other end of the roller shaft.
6. Raise the deck by moving the deck lift lever into the
top notch on the right fender. Raise and support
the rear of the tractor to allow clearance for the
deck roller to be installed into the mower deck roller
brackets (Fig. 870).
Fig 870
7. Slide the deck roller assembly under the rear end of
the mower deck (Fig. 871).
Fig 871
GT Series Tractors Service Manual
8. Slide the height adjuster into the mower deck roller
bracket. Support the lift bracket and install the lift
bracket pin into the lift bracket (Fig. 872).
9. Install a hairpin into the lift bracket pin (Fig. 873).
PICT-7837
10. Repeat steps 8 and 9 on the other side of the deck
roller.
PICT-7935
MOWER DECK
Fig 872
Fig 873
PICT-7933
7
PICT-7929
7-37