Toro GT series Service Manual page 219

MOWER DECK
6. Loosen the nut from the bolt securing the pulley to
the spring loaded idler assembly (Fig. 747).
7. Tilt the spring loaded idler pulley and remove the
mower deck belt from the mower deck (Fig. 748).
7
7-2
Fig 747 PICT-7952
Fig 748 PICT-7953a
50" Mower Deck Belt Installation
1. Route the mower deck belt around the spindles and
idlers. Refer to the belt routing decal (Fig. 749):
Fig 749
2. Tilt the spring loaded idler pulley to route the belt
around it (Fig. 750).
Fig 750
GT Series Tractors Service Manual
decal 1 3354-977
PICT-7953a