Toro GT series Service Manual page 257

MOWER DECK
54" Mower Deck Spindle Installation
1. Check and apply grease to all three mower deck
spindles as needed.
2. Position the spindle assembly onto the top side of
the mower deck (pulley side facing up) (Fig. 879).
tioned so that it is facing toward the front
of the mower deck. This will allow for easier
greasing of the spindles.
7
7-40
Fig 879 PICT-7925
3. Install 4 screws securing the spindle assembly to the
mower deck (Fig. 880).
Note: The screws are installed from the bottom side
of the mower deck.
Fig 880
GT Series Tractors Service Manual
PICT-7884