Toro GT series Service Manual page 201

HYDROSTATIC DRIVE SYSTEM
5. Install 2 bolts securing the front of the hydrostatic
transmission to the frame (Fig. 689).
6. Position the transmission vent tube along the left
side of the frame and install a plastic push mount tie
to secure it to the frame and wire harness (Fig. 690).
6
6-14
Fig 689 PICT-7551
Fig 690 PICT-7561
7. Insert the bypass lever into the slot on the rear of
the machine. Slide the bypass lever onto the bypass
bracket on the transmission (Fig. 691).
Fig 691
8. Slide the return spring onto the bypass bracket (Fig.
692).
Fig 692
GT Series Tractors Service Manual
PICT-7559a
PICT-7558