Toro GT series Service Manual page 149

GEAR DRIVE SYSTEM
8. Install a bolt, nut and a self tapping screw to secure
the front of the transmission to the transmission
bracket (Fig. 490).
A. Bolt and nut
5
9. Insert the brake control rod through the hole in the
transmission bracket (Fig. 491).
5-18
A
B
Fig 490 PICT-7667
B. Self tapping screw
Fig 491 PICT-7666
10. Hook the brake control spring to the rear end of the
brake control rod (Fig. 492).
Fig 492
11. Insert the front end of the brake control rod into the
brake linkage (Fig. 493).
Fig 493
GT Series Tractors Service Manual
PICT-7662
PICT-7698