Toro GT series Service Manual page 122

13. Mark either the throttle or choke cable and corre-
sponding engine bracket to more easily identify them
upon installation (the choke is marked with tape in
the photo below) (Fig. 394).
Fig 394
A. Choke (outside linkage plate)
B. Throttle (inside linkage plate)
14. Loosen the cable clamp securing the throttle and
choke cable to the engine bracket (Fig. 395).
Fig 395
GT Series Tractors Service Manual
15. Unhook the throttle and choke cable z-bends from
A
B
PICT-7591
16. Slide the throttle and choke cables out of the cable
PICT-7596
the engine brackets (Fig. 396).
Fig 396
tie and the r-clamp located on the left side of the
engine (Fig. 397).
Fig 397
ENGINE
4
PICT-7597
PICT-7601
4-3