Toro GT series Service Manual page 148

3. Slide the wheel hub onto the axle shaft. Install a bolt
and washer to secure the wheel hub assembly to the
transmission axle shaft (Fig. 486).
Fig 486
4. Repeat step 2 to install the opposite wheel hub
assembly.
5. Position the variable speed pulley onto the trans-
mission (Fig. 487).
Fig 487
GT Series Tractors Service Manual
GEAR DRIVE SYSTEM
6. Carefully raise and support the transmission in the
machine (Fig. 488).
PICT-7679a
7. Install 4 bolts and nuts securing the sides of the
transmission to the frame (2 bolts and 2 nuts on
each side) (Fig. 489).
PICT-7696
Fig 488
PICT-7677
Fig 489 PICT-7669
5
5-17