Toro GT series Service Manual page 226

6. From the left side of the tractor, locate the deck
sup port pin on the rear left side of the deck. Pull the
deck support pin outward. Lift the deck into position
and release the deck support pin so that the deck is
hanging and supported by the deck support pin (Fig.
771).
Fig 771
GT Series Tractors Service Manual
7. Repeat the above step on the tractor's right side.
8. Using a breaker bar or ratchet, rotate the idler brack-
et forward and route the mower deck belt around the
electric PTO clutch (Fig. 772 and Fig. 773).
C
A
PICT-7988
A. Idler bracket
B. Spring
C. Pivoting idler pulley
MOWER DECK
D
E
B
Fig 772 Fig. 20 3354-975
D. Belt guard
E. 3/8" Square hole
Fig 773
7
PICT-7990
7-9