Toro GT series Service Manual page 146

23. Support the transmission.
24. Remove the 4 bolts and nuts securing the sides of
the transmission to the frame (2 bolts and 2 nuts on
each side) (Fig. 478).
Fig 478
25. Carefully lower the transmission from the machine
(Fig. 479).
Note: Variable speed pulley will be unsecured.
Fig 479
GT Series Tractors Service Manual
GEAR DRIVE SYSTEM
26. Remove the variable speed pulley from the trans-
mission (Fig. 480).
PICT-7670
27. Remove the bolt and washer securing the wheel hub
assembly to the transmission axle shaft. Remove the
wheel hub from the axle shaft (Fig. 481).
PICT-7677
Fig 480
PICT-7676
Fig 481 PICT-7679a
5
5-15