Variable Speed Drive Belt Replacement; Variable Speed Drive Belt Removal - Toro GT series Service Manual

Variable Speed Drive Belt
Replacement

Variable Speed Drive Belt Removal

1. Remove the transmission drive belt. Refer to "Trans-
mission Drive Belt Removal" on page 5-1.
2. Remove the shift knob (Fig. 440).
Fig 440
3. Remove the 4 screws securing the shift cover to the
frame (Fig. 441).
Fig 441
GT Series Tractors Service Manual
GEAR DRIVE SYSTEM
4. Remove the shift cover plate from the frame and lay
it to the side (Fig. 442).
5. Remove the Electric PTO clutch. Refer to "Electric
PTO Clutch Removal" on page 3-29.
6. Slide the engine pulley off the crankshaft and
remove the transmission drive belt from the engine
PICT-7632
pulley (Fig. 443).
PICT-7635
Fig 442 PICT-7636
Fig 443
PICT-7497
5
5-5