Toro GT series Service Manual page 259

MOWER DECK
4. Remove the spindle assembly from the vise and
remove the spindle shaft and spacer from the
spindle housing (Fig. 884).
5. Remove the bearing and two spacers from the pulley
side of the housing (Fig. 885).
7
7-42
Fig 884 PICT-7901
Fig 885 PICT-7903
6. Remove the second bearing from the blade side of
the spindle housing (Fig. 886).
Fig 886
7. Inspect the bearings and spacers. Replace if worn or
damaged.
8. Install a bearing into the blade side of the spindle
housing (Fig. 887).
Fig 887
GT Series Tractors Service Manual
PICT-7904
PICT-7906