Toro GT series Service Manual page 121

ENGINE
7. Lower the machine to the ground.
8. Remove the hood. Refer to "Hood Removal" on
page 3-34.
9. Remove the 2 screws securing the bumper to the
frame (1 bolt on the left and 1 on the right) (Fig.
390).
4
10. Remove the bumper (Fig. 391).
4-2
Fig 390 PICT-7245
Fig 391 PICT-7417
11. Remove the 4 screws securing the left and right side
bumper brackets to the frame (2 on the left and 2 on
the right) (Fig. 392).
Fig 392
manifold pipes and remove it from the machine (Fig.
393).
Fig 393
GT Series Tractors Service Manual
PICT-7423
PICT-7425