Toro GT series Service Manual page 147

GEAR DRIVE SYSTEM
28. Repeat step 28 to remove the opposite wheel hub
assembly.
29. Remove the nut securing the transmission pulley to
the transmission (Fig. 482).
5
30. Remove the transmission pulley (Fig. 483).
5-16
Fig 482 PICT-7682
Fig 483
PICT-7684
CVT Transmission Installation
1. Position the transmission pulley onto the trans-
mission (Fig. 484).
Fig 484
2. Install the nut securing the transmission pulley to the
transmission (Fig. 485).
Fig 485
GT Series Tractors Service Manual
PICT-7684
PICT-7682