Toro GT series Service Manual page 158

19. Remove the shift cover from the housing (Fig. 526).
Fig 526
20. Remove the shift lever assembly from the housing
(Fig. 527).
Fig 527
GT Series Tractors Service Manual
GEAR DRIVE SYSTEM
21. Remove the shifter insert from the housing (Fig.
528).
PICT-8301a
22. If the bearings are being replaced, drive out the
upper and lower needle bearings from the housing
for the input shaft through the hole (Fig. 529).
PICT-8304a
Fig 528
PICT-8305a
Fig 529 PICT-8306
5
5-27