3. Remove the 2 bolts securing the brake assembly to
the transmission housing (Fig. 510).
Fig 510
4. Remove the brake assembly from the transmission
(Fig. 511).
Note: Some transmissions have 2 washers (1 on
each bolt) between the brake assembly and
transmission housing.
Fig 511
GT Series Tractors Service Manual
GEAR DRIVE SYSTEM
5. Remove the brake disc from the transmission shaft
(Fig. 512).
PICT-8277a
6. Remove the puck from the transmission housing
(Fig. 513).
PICT-8278a
Fig 512
PICT-8280a
Fig 513
PICT-8281
5
5-23