Verify That Ipsis Are Translated; Verify Connectivity To Media Servers - Avaya S8700 Installing Manual

154 Installing the Avaya™ S8700 Media Server with Avaya™ G600 Media Gateway
Connecting to the IPSIs
NOTE:
Control network settings (IP address, subnet mask, and gateway) become effective when
you exit the IPADMIN session.
16 Check the LCD. Verify that it has an I P with a filled-in V showing at the bottom. (See
''LED display showing that the IPSI has a static IP address'' on page
LED display showing that the IPSI has a static IP address
Disconnect the laptop from the faceplate.
17
NOTE:
Always use the arp -d 192.11.13.6 command (step 4) to clear the ARP cache on the laptop
before connecting to another IPSI. If the cache is not cleared the laptop appears to hang
and does not connect to the next IPSI.
18 Repeat for each IPSI circuit pack.

Verify that IPSIs are translated

The following administration is done on a computer used to access the active media server
using a terminal emulation application
1 Type list ipserver-interface and press
Verify that all ISPI circuit packs are translated.
2

Verify Connectivity to Media Servers

The following administration is done on a computer used to access the active media server
using the Maintenance Web Interface.
NOTE:
We recommend that you be on the active media server.
CLK
S
E
R
V
Enter
May 2003
154)