Starting The Software; Performing A Cold Start - Hirschmann Power MICE User Manual

Loading Software Updates
Test stored images in USB memory
U
Select 4 to test, if the stored images of the software in ACA 21-USB con-
tain valid codes.
Apply and store selection
U
Select 5 to apply and store the selection of the software.
Cancel selection
U
Select Sie 6 to cancel selection and leave this dialogue without changes.

4.1.2 Starting the software

This menu of the System monitor offers you the possibility to start the selec-
ted software.

4.1.3 Performing a cold start

This menu of the system monitor offers you the possibility to reset the hard-
ware of the Switch and to reboot.
Basic - L3P
Release 3.1 06/07
4.1 Loading the Software from the ACA
65