Combined Seat Height Adjustment/Seat Tilt; Power Back Angle Adjustment; Controlling Power Seat Functions; Joystick Functions - Otto Bock Skippi Instructions For Use Manual

Use

8.12.4 Combined seat height adjustment/seat tilt

INFORMATION
► Also observe the safety instructions in the section "Power seat functions" (see Page 39).
► Observe the instructions for use in the sections "Controlling power seat functions" (see Page 42) and "Joy­
stick functions" (see Page 42).
This function allows the seat to be tilted while continuously raising the seat surface at the same time.
For further information on the functions and relevant safety information, see the preceding section.

8.12.5 Power back angle adjustment

WARNING
Incorrect use of back angle adjustment
Falling, tipping over due to driving with unallowable seat settings
► Drive in street traffic only with a vertical backrest.
► When driving with the back angle adjustment activated, even at home, fasten the belts and do not lean out
beyond the seat surface.
INFORMATION
► Also observe the safety instructions in the section "Power seat functions" (see Page 39).
► Observe the instructions for use in the sections "Controlling power seat functions" (see Page 42) and "Joy­
stick functions" (see Page 42).
29

8.12.6 Controlling power seat functions

• Power seat functions are activated and controlled via the control panel (see Page 26).
• Holding the [Mode] button (approx. 2 seconds; ) activates control of the first power seat function.
• The LCD screen indicates the currently selected seat function (see the following section "Joystick functions").
The driving function is not available at this time and the speed level indicator switches off.
• To switch between the various seat functions, press the [Mode] button briefly or move the joystick to the right.
• Once a seat function has been activated, it is adjusted by moving the joystick forward or backward.
• The electric motor moves the seat according to the seat function as long as the joystick is deflected and stops
at the end positions.
• Holding the [Mode] button again (approx. 2 seconds) deactivates the seat function in the selected position. The
driving function is available again and the speed level indicator on the LCD screen is lit.

8.12.7 Joystick functions

The following power seat functions can be controlled with the joystick:
Display
42
Function
Power seat height adjustment
The power back angle adjustment feature enables the
backrest to be tilted up to 25°.
The backrest can be tilted back continuously to the
angle specified above.
Joystick movement
Forward: Seat surface moves up
Back: Seat surface moves down
1)
Skippi