Seat Height Adjustment - Otto Bock Skippi Plus Instructions For Use Manual

INFORMATION
Bring the seat to a level position when getting into or out of
the power wheelchair.
INFORMATION
For safe operation, please also observe the information in
section 2.3 "General safety instructions" and section 2.5
"Safety requirements for operation".

7.1.2 Seat height adjustment

WARNING
Risk of falling due to improper use of the seat height
adjustment feature.
„ Drive in street traffic only with the seat height adjust-
ment lowered.
„ Use the seat height adjustment feature only with the
backrest in the upright position.
„ When driving with the seat height adjustment feature
raised, fasten the belts (lap belt, four-point belt) and
do not lean out beyond the seat surface. Ensure that
creep speed is activated when the seat height adjust-
ment function is used. If this is not the case, contact a
Skippi Plus
specialist dealer immediately. Only use the power
wheelchair with the seat height adjustment in its lowest
position until the fault is repaired.
NOTICE
Damage due to lack of maintenance of the seat height
adjustment feature.
„ Inspect the seat height adjustment feature for visible
signs of damage at least 1 x per month and ensure all
screw connections are tight.
„ Check for correct tyre pressure.
NOTICE
Risk of transportation damage. Always lower the seat
height adjustment feature fully for loading or transportation.
INFORMATION
Please also observe the safety instructions in the section
"Electric seat functions" > "Safety instructions for use".
INFORMATION
A sufficient supply of power must be maintained in order to
guarantee proper operation of the seat height adjustment
function.
Accessories
Ottobock | 69