Control Panel; Buttons And Display Functions - Otto Bock C2000 Instructions For Use Manual

Use
Because the control unit is programmable, it can be adapted to the personal requirements of the user; e.g. the
speed, acceleration and deceleration values can all be adapted.

8.6.1 Control panel

The power wheelchair is operated using the control panel.
The control panel consists of a button section, LCD screen and joystick. The charging receptacle and two inputs
for external buttons are located on the underside.
The control panel is used to switch the power wheelchair on and off, enter driving commands and display the cur­
rent status of certain functions and components.
14
15

8.6.2 Buttons and display functions

Joystick
The speed and driving direction are controlled with the joystick (see Page 30).
When a power seat option is activated, the joystick adjusts this seat option (see Page 43).
[On/off] button
Holding this button turns the power wheelchair on or off (see Page 29).
[Mode] button
Pressing the button briefly increases/decreases the speed level (see Page 30).
Holding the button longer (for at least 2 seconds) switches the control unit to the Power seat functions or Addi­
tional options menu.
In combination with additional operating steps, holding the button longer (at least 5 seconds) also activates/deac­
tivates the drive-away lock (see Page 31).
[Warning flasher on/off] button
All 4 warning flashers are activated/deactivated when this button is pressed.
[Horn] button
The horn will sound as long as the button is pressed.
24
Front
1 Joystick
2 [On/Off] button
3 LCD screen
4 [Mode] button
5 [Warning flashers on/off] button
6 [Horn] button
7 [Direction indicator left/right – on/off] button
8 [Lights on/off] button
Back
1 Connection for external [On/Off] button
2 Connection for external [Mode] button
3 Programming receptacle
C2000