Control Unit; Control Panel; Buttons And Display Functions - Otto Bock C1000 SF Instructions For Use Manual

6.7 Control unit

CAUTION
Risk of uncontrolled driving behaviour
Falling, tipping, collision with persons or nearby objects due to interference from electromagnetic fields
► Switch all mobile devices off while driving.
► Turn the control unit off when it is not needed.
The power wheelchair is controlled by an enAble50 control unit.
Because the control unit is programmable, it can be adapted to the personal requirements of the user; e.g. the
speed, acceleration and deceleration values can all be adapted.

6.7.1 Control panel

The power wheelchair is operated using the control panel.
The control panel consists of a button section, LCD screen and joystick. The programming receptacle and two
inputs for external buttons are located on the underside.
The control panel is used to switch the power wheelchair on and off, enter driving commands and display the cur­
rent status of certain functions and components.
14
15

6.7.2 Buttons and display functions

INFORMATION
If your power wheelchair is equipped with an LCD monitor, please also read the section "Separate LCD monitor"
(see Page 42).
Joystick
The speed and driving direction are controlled with the joystick (see Page 27).
When a power seat option is activated, the joystick adjusts this seat option (see Page 40).
[On/off] button
Holding this button turns the power wheelchair on or off (see Page 27).
C1000 SF
Front
1 Joystick
2 [On/Off] button
3 LCD screen
4 [Mode] button
5 [Warning flashers on/off] button
6 [Horn] button
7 [Direction indicator left/right – on/off] button
8 [Lights on/off] button
Back
1 Connection for external [On/Off] button
2 Connection for external [Mode] button
3 Programming receptacle
Use
21