Table of Contents
Advertisement
Use
Display
Flashing light
Further LED display functions
Further LED display symbols are described in the following sections:
•
Section "Selecting the speed levels" (see page 58)
•
Section "Drive-away lock" (see page 61)
•
Section "Troubleshooting" (see page 106)
•
Section "Power seat functions" (see page 73)
7.6.2 R-Net control device with CJSM control panel
CAUTION
Risk of uncontrolled driving behaviour
Falling, tipping, collision with persons or nearby objects due to interference from electromagnetic fields
► Switch all mobile devices off while driving.
► Turn the control unit off when it is not needed.
The power wheelchair is controlled by an R-Net control device in combination with the CJSM control panel.
Because the control unit is programmable, it can be adapted to the personal requirements of the user; e.g. the
speed, acceleration and deceleration values can all be adapted.
7.6.2.1 Control panel
The power wheelchair is operated using the control panel.
The control panel consists of a button section, LCD screen and joystick. The charging receptacle and two inputs
for external buttons are located on the underside.
The control panel is used to switch the power wheelchair on and off, enter driving commands and display the cur
rent status of certain functions and components.
Front
29
30
Information
Battery overvoltage
1
Joystick
2
[Slow Speed] button; [Fast Speed] button
3
[Mode] button
4
LCD screen (colour)
5
[On/Off] button
6
[Horn] button
7
[Profiles] button
490E75=1_C
Hide quick links:
Advertisement
Table of Contents
