1
REMOVING THE FRONT FAIRING
◆
Position the vehicle on the stand, see p.
82 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Turn the ignition switch to position "".
◆
Unscrew and remove the two side
screws (1).
108
use and maintenance RSV mille TUONO
Unscrew and remove the two upper
screws (2).
Upon reassembly, tighten the screw (2)
moderately, since it is fixed on plastic.
◆
Move the front fairing (3) slightly forward.
◆
Disconnect the electrical connector (4) of
the headlight.
◆
Remove the front fairing (3) completely,
together with the headlight.
Upon reassembly, make sure that the
electric connector (4) is fitted to the
matching connector.
- RSV mille R TUONO
2
Handle plastic and paint-finished parts
w i t h c a r e t o a v o i d s c r a t c h i n g o r
damage.
4
3