Step 1 : Loading Roll Media (Setup Of Media) - Roland TrueVIS VG-640 User Manual

Step 1 : Loading Roll Media (Setup of Media)

Load the roll media on the printer. When you have finished loading the media, [SETUP] lights. This work is
referred to as "Setup of Media."
CAUTION
CAUTION
CAUTION
1.
Install the media on the media holders.
Note: The media holders of this machine are designed to be used exclusively with media that has a paper tube
(core) with an inner diameter of 3 inches. To use 2-inch media, the optional media flanges are required.
For information about optional items, contact your authorized Roland DG Corp. dealer.
A
Open the front cover.
B
Move the media clamps to the left and right ends respectively.
C
Loosen the retaining screws of the media holders, and then draw them to the left and
right ends respectively.
Load roll media correctly.
Otherwise the media may fall and cause injury.
The roll media is approximately 40 kg (88 lb.). To avoid injury, handle the
roll media with care.
Never load media that weighs over 40 kg (88 lb.).
The machine may fail to withstand the weight and tip over or cause the media
to fall.
Basic Printing Method
Rear
29
2