Roland TrueVIS VG-640 User Manual page 112

Replacing Consumable Parts
OPEN FRONT
Preparation is complete once the following screen is displayed.
FINISHED?
2.
Replace the separating knife.
A
Remove the separating knife.
1
Loosen the screw until it slips out.
2 Grasp the screw portion, and then slowly pull it out in the direction of the arrow.
3
When doing this, do not pull it back toward you.
B
Install a new knife.
The knife is secured in place by the magnet.
C
Slowly insert it into the groove.
110
COVER
Magnet
Positioning
groove