Daily Maintenance; Cleaning - Roland TrueVIS VG-640 User Manual

Daily Maintenance

Cleaning

WARNING
CAUTION
Wipe away any ink or grime on the media path and other areas as part of the daily cleaning procedure. Pinch
rollers, grit rollers, and the platen are particularly prone to the buildup of grime. Clean by wiping with a cloth
moistened with neutral detergent diluted with water then wrung dry.
3 3
I m p o rt a n t
• This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.
• Never attempt to oil or lubricate the machine.
Pinch rollers
Periodically wipe away any grime. Failure
to clean this part properly may result in the
transfer of grime to the surface of media.
80
Never use a solvent such as gasoline, alcohol, or thinner to perform

cleaning.

Doing so may cause a fire.
Before attempting cleaning, switch off the sub power and wait until the
platen and dryer cool (approximately 30 minutes).
Sudden movement of the machine may cause injury, or hot components may
cause burns.
Grit rollers
Remove buildup of media scraps
and other material using a brush.
Never use a metal brush.
Separating knife roller
This part is prone to paper dust
buildup. Periodically wipe the area
clean. Failure to clean this part
properly may result in the transfer of
grime to the surface of media.
Wipe away any buildup of ink or
grime on the media path.