Loading Media; Loading Roll Media - Roland SJ-740 User Manual

2-2 Loading Media

Be sure to install the media guide when loading roll media.
Otherwise the roll may fall and cause injury.
Load roll media at the proper position.
Otherwise the roll may fall, resulting in injury.
When the reinforcement pipe is inserted into the paper tube, do not angle the roll media.
The reinforcement pipe may protrude from the roll media and cause injury.
Do not touch the rail or the inner side of the left and right cover. Touching
the area shown may cause the fingers to be soiled by grease or ink, and may
result in diminished image quality.

Loading Roll Media

1 Open the front cover.
2 Line up with the core diameter of the loaded roll media and refit the left- and right-hand media flanges.
1)
3)
Fit the hole on the left side of the roll media all the way onto the left-hand media flange.
3
34
Chapter 2 - Basic Operation
2)
Flange retaining pin
Line up the ridges
and grooves.
Rail portion
Do not put hands inside
Media flange
Media flange
2 in.
3 in.
4)