Displaying The Amount Of Media Remaining - Roland TrueVIS VG-640 User Manual

E
Press [ ] or [ ] to select a setting.
EMPTY MODE
STOP CONT.
STOP
Printing pauses immediately when an ink pouch becomes empty.
CONT.
Printing does not stop automatically when an ink pouch becomes empty. When an
(continue) ink pouch becomes empty, a warning beep sounds.
F
Press [ENTER] to confirm your entry.
G
Press [MENU] to go back to the original screen.
Description
When "STOP" is selected, printing pauses, so colors may be uneven. Ensure that the remaining ink is sufficient
before you begin printing. When "CONT" is selected, printing does not stop even if ink runs out completely.
To replace an ink pouch, wait until printing ends or press [PAUSE] to pause printing.
Default Setting
[EMPTY MODE]: STOP

Displaying the Amount of Media Remaining

You can display how much of the media in use is left. By setting the amount of media currently remaining at
the start, the amount remaining will be constantly displayed on the screen until it reaches zero.
Procedure
A
Press [MENU].
B
Press [ ] several times to display the screen shown below.
MENU
SHEET REMAIN
C
Press [ ], then [ ] to display the screen shown below.
SHEET REMAIN
SET LENGTH
D
Press [ ] to display the screen shown below.
SET LENGTH
0.0m 99.9m
Output Operation Management
5
159