Roland TrueVIS VG-640 User Manual page 36

Basic Printing Method
4.
Secure the media in place.
A
Make sure both edges of the media are above the grit rollers.
Be sure to place the right edge of the media on the right-end grit roller.
2
B
Place the left and right pinch rollers (affixed with blue stickers) on both edges of the
media.
Position them approximately 10 mm (0.39 in.) from each edge of the media.
Left pinch roller (affixed with a blue sticker)
If you want to readjust the media position before securing it in place, redo the procedure
2
from step
If you just hold the media to readjust its position forcibly, the media will be skewed during printing, which
will have an effect on the printing quality.
34
About 10 mm (0.39 in.)
A
.
-
Grit roller
Right pinch roller (affixed with a blue sticker)
About 10 mm (0.39 in.)