Setup Of Media; Setup Of Roll Media - Roland TrueVIS MG-640 User Manual

Setup of Media

Setup of Roll Media

Load the roll media on the printer. When you have finished loading the media, [SETUP] lights. This work is
referred to as "Setup of Media."
CAUTION
Load the roll media correctly.
Otherwise the media may fall and cause injury.
CAUTION
The roll media is approximately 40 kg (88.2 lb.) (30-inch model: 25 kg [55.1 lb.]).
To avoid injury, handle the roll media with care.
CAUTION
Never load media that weighs over 40 kg (88.2 lb.) (30-inch model: 25 kg [55.1 lb.]).
The machine may fail to withstand the weight and tip over or cause the media to fall.
1. Install the media on the media holders.
WARNING
Handling roll media is an operation that must be performed by 2 persons or more, and care must
be taken to prevent falls.
Attempting to lift heavy media in a manner that taxes your strength may cause physical injury. Also, if dropped, such
items may cause injury.
MEMO
The media holders of this machine are designed to be used with a paper tube (core) with an inner diameter of 2 inches
or 3 inches.
Procedure
1.
Open the front cover.
2.
When the print head height is "LOW" or "HIGH", move the media clamps to the outside of the grit rollers
on the left and right edges respectively.
30
Basic Operations