Roland TrueVIS VG-640 User Manual page 58

Basic Printing Method
G
Press [FUNCTION] to go back to the original screen.
H
Repeat step
M E M O
When performing continuous test prints, there is no need to set the base point from the second
print onward. However, the base point will be restored to its default and it will be necessary to set
2
it again if any of the following operations are made between printing operations.
• Sheet cutting
• Printing and cutting of output data you created
• Setup cancellation
If the problem persists, try performing normal cleaning again. If the printer has been used for a long
period, dot drop-outs may not be fixed even after performing normal cleaning two or three times.
If the problem does not go away, try cleaning using a different method.
" P. 85, "When Normal Cleaning Is Not Effective"
56
1
to make sure the dot drop-out has been corrected.