Table of Contents
Advertisement
2-2 Loading Media
Be sure to install the media guide when loading roll media.
Otherwise the roll may fall and cause injury.
Load roll media at the proper position.
Otherwise the roll may fall, resulting in injury.
Do not touch the rail or the inner side of the left and right cover. Touching
the area shown may cause the fingers to be soiled by grease or ink, and may
result in diminished image quality.
Loading Roll Media
Open the front cover.
1
Line up with the core diameter of the loaded roll media and refit the left- and right-hand media flanges.
2
1)
3)
Fit the hole on the left side of the roll media all the way onto the left-hand media flange.
3
32
Chapter 2 - Basic Operation
2)
Flange retaining pin
Line up the ridges
and grooves.
Rail portion
Do not put hands inside
Media flange
Media flange
2 in.
3 in.
4)
Advertisement
Table of Contents
