Using Media That Wrinkles Easily/Does Not Move Smoothly - Roland TrueVIS VG-640 User Manual

Using Media That Wrinkles Easily/Does Not Move Smoothly

Procedure
A
Press [MENU].
B
Press [ ] several times to display the screen shown below.
MENU
SUB MENU
C
Press [ ] once, and then press [ ] several times to display the screen shown below.
SUB MENU
VACUUM POWER
D
Press [ ] to display the screen shown below.
VACUUM POWER
AUTO AUTO
E
Press [ ] or [ ] to select a value.
When the media is flimsy and cannot move smoothly, decreasing this value (reducing
0 to 100%
the suction force) may correct the problem.
AUTO
The suction force is automatically adjusted to the optimal level for the media width
VACUUM POWER
AUTO
F
Press [ENTER] to confirm your entry.
G
Press [MENU] to go back to the original screen.
Description
The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding
to the nature and condition of the media. Depending on the software RIP you are using, you can also make this
setting in the software RIP. When you have made the setting in the software RIP, the machine's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
Configuring Settings to Match the Properties of the Media
90%
4
131