Roland TrueVIS VG-640 User Manual page 32

Basic Printing Method
D
Fit the paper tube (core) of the media on the end cap of the left media holder, and then
move the right media holder to fit its media cap onto the paper tube (core) of the media.
Fit the paper tube onto the media holders securely to prevent the media from moving easily.
2
Important: Position the left media holder correctly.
If the position of the left media holder is incorrect, media may not be fed properly, which will have an adverse
effect on the printing results. Use the following procedure to determine the appropriate position.
Important: Do not secure the media holders in place just yet.
In the following procedure, you will adjust the positions of the media holders before securing them in place.
Do not secure them in place just yet.
30
End cap