Roland TrueVIS VG-640 User Manual page 188

A Message Appears
[CHANGE CL-LIQUID
FOR WIPER]
[WIPER TRAY IS
NOT FILLED]
[TIME FOR
TRAY CLEANING]
[CLOSE
WASTE VALVE]
6
186
Either no wiper cleaning liquid
pouch has been inserted or it
has run out.
The wiper tray was not full with
cleaning liquid when the sub
power was turned on.
it is time to clean the wiper tray.
The waste valve was open when
the sub power was turned on.
After verifying the message, press [ENTER].
Either no wiper cleaning liquid pouch has been
inserted or it has run out. If you have forgotten to
insert the wiper cleaning liquid pouch, insert it. If
the cleaning liquid has run out, replace the cleaning
liquid pouch with a new item.
" P. 70 "Cleaning Liquid Pouch Replacement"
After verifying the message, press [ENTER].
The wiper tray is filled with cleaning liquid.
After verifying the message, press [ENTER].
Clean the wiper tray, and then replace the tray pads.
" P. 102 "Cleaning the Wiper Tray and Replacing the
Tray Pads"
Open the right cover, and then close the waste valve.