Setting The Cutting Test And The Blade Force - Roland TrueVIS VG-640 User Manual

Setting the Cutting Test and the Blade Force

For high-quality cutting, we recommend carrying out a cutting test to check the cutting quality for the media
before you perform actual cutting. Adjust the blade force depending on the cutting quality.
1.
Carry out the cutting test.
A
Close the front cover.
B
Press [ ], [ ], [ ], or [ ] to move the cutting carriage to the location where you want to
carry out the cutting test.
You can freely set the location for the cutting test.
C
Press [FUNCTION].
D
Press [ ] several times to display the screen shown below.
FUNCTION
CUT CONFIG
E
Press [ ] to display the screen shown below.
CUT CONFIG
TEST CUT
F
Press [ENTER].
The test pattern is cut.
2.
Set the blade force.
A
Press [ ] to display the screen shown below.
CUT CONFIG
FORCE
B
Press [ ] to display the screen shown below.
FORCE
50gf 50gf
Basic Settings for Cutting
2
61