Roland TrueVIS VG-640 User Manual page 110

Replacing Consumable Parts
C
Install the cutting tool in the cutting carriage.
3
D
Tighten the screw.
Tug the blade holder upward to make sure it does not come loose.
3.
Quit the "REPLACE KNIFE" menu.
A
Close the front cover.
B
Press [ENTER].
When the following screen is displayed again, the blade replacement is finished.
MAINTENANCE
REPLACE KNIFE
C
Press [MENU] to go back to the original screen.
4.
Adjusting the cutting conditions and cutting-in amount.
P. 135 "Fine-tuning the Cutting Conditions"
"
108
OK
,
P. 137 "Accurately Adjusting the Cutting-in Amount"
Not OK