Roland TrueVIS VG-640 User Manual page 107

F
When the following screen is displayed, replace the tray pad.
There are three tray pads. Replace all three tray pads.
I m p o r t an t
Place the tray pad with an orientation that matches the shape of the wiper tray. If you place the tray
pad with the incorrect orientation, it will not be possible to clean the wiper correctly.
FINISHED?
G
Press [ENTER].
H
When the following screen is displayed, close the right cover.
CLOSE COVER R
The screen shown below appears, and then the machine is filled with cleaning liquid. The (approxi-
mate) remaining time for the procedure is displayed on the screen. (The display shown below is an
example. "01:40" = "1 minute and 40 seconds")
FILLING LIQUID..
>>>>>
If the wiper cleaning liquid runs out during filling, the screen shown below appears. Replace the
wiper cleaning liquid pouch. When you replace the wiper cleaning liquid pouch, the display returns
to the original screen.
P. 70 "Cleaning Liquid Pouch Replacement"
"
CHANGE CL-LIQUID
FOR WIPER
When the following screen is displayed again, the wiper tray cleaning is finished.
MAINTENANCE
TRAY CLEANING
I
Press [MENU] to go back to the original screen.
01:40
Replacing Consumable Parts
Tray pad
3
105