Roland TrueVIS VG-640 User Manual page 149

2.
Set the align points.
A
Press [ ], [ ], [ ], or [ ] to move the center of the blade to the "align point 1" position.
Crop mark
(Align point 1)
B
Press [FUNCTION] to display the screen shown below.
FUNCTION
BASE POINT
C
Press [ ] to display the screen shown below.
BASE POINT
ALIGN POINT 1
D
Press [ENTER].
The [ALIGN POINT] is set. The characters "B1" are displayed on the screen.
W1100mm
B1
E
Repeat steps through
A
The number of the align point you are setting is determined automatically.
3.
Send the cutting data from the computer.
Advanced Settings for Printing and Cutting with Crop Marks
to specify "ALIGN POINT 2" and "ALIGN POINT 3" as required.
D
4
147