When Moving The Unit; Procedure From Preparing To Move To Reinstallation - Roland TrueVIS VG-640 User Manual

When Moving the Unit

Procedure from Preparing to Move to Reinstallation

Before moving the machine, dispose of the discharged fluid and secure the print heads in place. Attempting to
move the machine without first performing these preparations may result in damage to internal components
due to leaking ink or damage to the print heads.
I m p o rt an t
• Once the arrangement to transfer the machine is complete, move the machine promptly, and turn on
the power immediately after the machine is relocated. If you leave the machine without turning on the
power, the deposited ink is coagulated, and it may result in problems such as clogging of the print heads.
• When moving the machine, keep it at a temperature between 5 to 40°C (41 to 104°F) and at relative
humidity between 20 to 80% (with no condensation). Failure to do so may result in breakdown.
• Handle the machine with care when moving, keeping it level (not tilted at an angle) and preventing it
from striking other objects.
1.
Prepare to move the machine.
A
Discard the discharged fluid.
P. 112 "Disposing of Discharged Fluid"
"
B
Remove the blade holder.
5
C
Raise the loading lever.
168