Before You Begin - Nortel CallPilot 201i Hardware Installation

November 2006
In this diagram, the CD-ROM drive is the first device. The tape drive is the
last device.
201i cabling
Meridian 1
201i
NTRH30AA
Rear
I/O panel
Note: Alternate SCSI device connection scenarios are supported, but are not
depicted in this guide. If you want to use a connection scenario that is not
described in this guide, ensure that you use appropriate cabling for each
device.

Before you begin

Before you install the SCSI devices in a daisy chain, you must configure the
SCSI device IDs and DIP switches. For instructions, refer to Chapter 7,
"Preparing peripheral devices."
201i Server Hardware Installation
NTRH1408
NTRH1410
Installing the 201i server in a large Meridian 1 system
Peripheral cabling
SCSI device cable
NTRH3502
Optional
NTRH9038
Tape drive
NTRH9105
CD-ROM
drive
G101430
67