Connecting The Cd-Rom And Tape Drives - Nortel CallPilot 201i Hardware Installation

Connecting peripheral devices to the 201i server

Connecting the CD-ROM and tape drives

Introduction
You can connect the CD-ROM, tape drive, or both to the intermediate SCSI
cable that you installed earlier.
Before you begin
Before you can connect the CD-ROM or tape drive, ensure that you have
completed the following tasks:
1. Install the intermediate SCSI cable.
For
Meridian 1
Option 11C
Option 11C Mini
Succession 1000
2. Set the SCSI ID and device termination settings as described in
"Setting the CD-ROM drive SCSI ID and DIP switches" on page 126
"Setting SCSI device termination" on page 130
144
See
"Installing the SCSI cables for Meridian 1"
on page 65.
"Installing the intermediate SCSI cable for
Option 11C" on page 78.
"Installing the NTRH3502 SCSI cable for
Option 11C Mini" on page 86.
"Installing the NTRH3502 SCSI cable for
Succession 1000" on page 110.
Standard 1.07
CallPilot