Installing The Intermediate Scsi Cable For Option 11C - Nortel CallPilot 201i Hardware Installation

Installing the 201i server in an Option 11C or Option 11C Mini
Installing the intermediate SCSI cable for
Option 11C
Introduction
Before you can connect an external CD-ROM or tape drive to the 201i
server, Option 11C requires an intermediate SCSI cable (NTRH1407).
Note: If you are installing the 201i server in an Option 11C Mini, go to page
86.
Cable description
The connector on the NTRH1407 cable that attaches to the 201i server
faceplate is a low-profile right-angle connector. This allows the SCSI device
to be permanently connected to the 201i server with the Option 11C cabinet
cover on.
The SCSI device connector end is equipped with a bracket assembly. This
bracket assembly attaches to the Option 11C below the card cage. The
CD-ROM or tape drive connects to this bracket assembly with the
NTRH3502 cable that is provided with the device.
78
Standard 1.07
CallPilot