Nortel CallPilot 201i Hardware Installation page 38

Preparing for installation
Step Description
2 Familiarize yourself with the "Switch and network
requirements" on page 44 of this guide.
3 If you are installing the 201i server into a Meridian 1 tiered
system, do the following:
4 Install the intermediate SCSI cable. This cable connects the
external CD-ROM or tape drive.
5 Set the DIP switches on the modem (see page 124).
38
Change the location of the secondary backplane
(DS30X) connector on the 201i server (see page 50).
Replace the existing backplane (tip and ring) cable on the
Meridian 1 with the one supplied with the 201i server
(NTRH3501) (see pages 58–64).
For Meridian 1, you require two cables to complete the
connection between the 201i server and the SCSI device:
NTRH1408 and NTRH1410. See page 65.
For Option 11C, you require two cables to complete the
connection between the 201i server and the SCSI device:
NTRH1407 and NTRH3502. See page 78.
For Option 11C Mini or Succession 1000, you require
one cable to complete the connection between the 201i
server and the SCSI device: the NTRH3502 cable that is
provided in the CD-ROM and tape drive kits. See the
following:
— Option 11C Mini: page 86
— Succession 1000: page 110
Standard 1.07
Check
❒
❒
❒
❒
CallPilot