To Connect The Cd-Rom And Tape Drives To The 201I Server (Meridian 1) - Nortel CallPilot 201i Hardware Installation

November 2006
Selecting the procedure for your switch
IF you are working with
a large Meridian 1 switch
(such as Option 51)
Option 11C
Option 11C Mini
Succession 1000
To connect the CD-ROM and tape drives to the
201i server (Meridian 1)
Note: If you are connecting the SCSI devices to the Option 11C, go to page
147. If you are connecting the SCSI devices to the Option 11C Mini, go to
page 149.
1 Connect the first SCSI device.
2 Follow instructions below:
IF the first device is the THEN
CD-ROM drive
201i Server Hardware Installation
Connecting peripheral devices to the 201i server
THEN see
"To connect the CD-ROM and tape drives
to the 201i server (Meridian 1)" on page
145.
"To connect the CD-ROM and tape drives
to the 201i server (Option 11C)" on page
147.
"To connect the CD-ROM and tape drives
to the 201i server (Option 11C Mini)" on
page 149.
"To connect the CD-ROM and tape drives
to the 201i server (Succession 1000)" on
page 151.
connect the CD-ROM drive to the
NTRH1410 cable that you connected earlier
to the Meridian 1 I/O panel.
145