201I Server Description - Nortel CallPilot 201i Hardware Installation

About the 201i server

201i server description

Introduction
The 201i server is a flexible multimedia telephony server designed to
integrate with Nortel Meridian 1
The 201i server occupies two slots of a Meridian 1 shelf or Succession 1000
Media Gateway or Media Gateway Expansion. When the server is locked
into position, its connectors attach to the backplane, which provides power
and communications links.
RoHS compliance
Nortel is phasing in RoHS-compliant 201i servers in countries affected by
the EUED (European Union Environmental Directives). This hardware
replaces or supplements the non-RoHS version. In general, the RoHS parts
are backwards compatible with the supported software, and they have
equivalent functionality to the parts they are replacing. RoHS refers to the
Reduction of Hazardous Substances Directive.
The text and diagrams in this guide refer to the part numbers for non-RoHS-
compliant servers. If you are installing a RoHS-compliant server, see
Appendix A, "RoHS part conversion table," for a listing of each RoHS-
compliant part mapped to the equivalent non-RoHS-compliant part.
Primary components
The 201i server motherboard houses the interfaces needed:
to communicate with the Meridian 1 switch or Succession 1000 system
to facilitate data communications on Ethernet networks.
16
*
and Succession
Standard 1.07
*
1000 products.
CallPilot